Q: HOW TO INSTALL THE FILM INSTALLATION?

A: UltraVision tint films should be installed in a certified center by an experienced and qualified specialist.
 

 

Q: APPLICATION OF THE FILM?

A: UltraVision tinting films are designed for installation on the inner surface of the glass.

 

 

Q: HOW TO OPERATE WITH THE FILM?

The operation of the glass, with the applied film, is allowed only after the complete drying
of the adjusting solution, namely after 72 hours at an ambient temperature above 20 ° C/68 ° F.
The operation of the glass, with applied film, at negative ambient temperatures, is allowed
only after the complete drying of the adjusting solution, namely after 168 hours, provided
that the car is warmed up every day for at least 3 hours. Do not physically affect the film,
until the drying solution dries completely.

 

 

Q: HOW FAST DOES THE TINT COMPLETELY DRY?

*ambient temperature from -30 ℃/-22°F to +30 ℃/86°F
*relative humidity of air from 50% to 90%,
*During the service life of UltraVision films, it is possible to change the technical parameters
and shade of the film.

 

 

Q: WHAT IS THE SHELF LIFE OF FILM?

Store the film at a temperature of 19-21 ° C/66-70°F and a relative humidity of 35-50%. When
storing the film, do not remove the original packaging. Keep the film away from heat sources,
the distance to the battery (heating elements) should not be less than 3 feet. When storing,
exclude the possibility of direct sunlight on the film.
When following these recommendations, the shelf life of the tint films will be 2 years.

​

Q: WHAT SHALL I DO IF THE FILM IS DAMAGED?

  If any damage is found upon arrival, please return the film immediately. If you attempt to install a damaged film, you will no longer be able to return it.

​​

​​